Dr. Brad Muller
The WSR-88D measures radial
velocities in addition to reflectivity by measuring the Doppler effect on the radar
beam. The Doppler effect is that when a target (usually
precipitation in the case of a wather radar) is moving away from the
radar, the wavelength of the return echo is longer
than that of the emitted electromagnetic pulse. When the target
is moving toward the radar, the return echo has a shorter
wavelength than that of the emitted pulse (seen in this slide from NWS
Milwaukee):
The wavelength shift can be used to calculate a doppler velocity (see Doppler Radar Formulas) which is the component of movement either toward or away from the radar, also called the radial velocity.
Radial velocity is the component of wind velocity parallel to the direction of the radar beam either toward or away from the radar.
Radial velocities are defined as (+) when they are moving away from the radar (outbound).
Radial velocities are defined as (-) when they are moving toward the radar (inbound).
The figure below shows the relationship of wind and radial velocity:
Vr = V cos (theta) = V cos
(0) = V x 1 = V
In this case the radar sees "all" of the wind--the radial velocity is the actual velocity.
Perpendicular (wind at right angles to the beam)
Vr = V cos (theta) = V cos (90) = V x 0 = 0
In this case the radar cannot "see" any of the wind (radial velocity is zero) because there is no component along the beam.
A typical relatively uniform wind field shows radial velocities at a maximum when the radar beam is lined up with the wind direction, and zero when it is perpendicular (as seen in the following slide from the NWS Milwaukee NEXRAD tutorial):
Note that the general wind direction can be discerned as perpendicular to the "zero isodop," and on a line between the incoming and outgoing wind maxima.
This link shows a variety of idealized wind patterns and how they would be appear in terms of radial velocity on a PPI (from the University of Illinois' Weather 2010 site). There are two main considerations in the radial velocity patterns that emerge:
(1) how the beam is oriented in relation to the wind direction at any given location
(2) vertical shear of the wind speed or direction, since the elevation of the radar beam above ground level increases with distance from the radar
The following example of radial velocity from the Portland, Oregon NEXRAD site and an accompanying model wind sounding illustrates how some of the idealized concepts apply in a real weather situation. Note the shift of the orientation of the zero isodop with range in conjunction with vertical wind shear in the sounding. Low-level winds are southerly, but shift to southwesterly aloft.
Simple Applications of Doppler Velocity:
Improved detection of severe weather was the primary budgetary justification for NEXRAD; this includes the detection of microburst divergence and tornadic rotation.
Divergence
Divergence associated with microbursts and downbursts can be detected as signatures of outbound doppler velocities in close proximity to inbound signatures along the line of the radar beam. The inbound winds are closer to the radar, with outbound winds slightly farther (the reverse, with inbound farther and outbound closer would be a convergent signature).
Rotation:
Rotational signatures are seen as side-by-side outbound and inbound doppler velocities in close proximity across the radar beam:
Example: Rotation at the bottom of the storm, divergence at the top:
Tornadic rotational velocities:
Storm-Relative vs. Base Velocity:
Base velocity is just the ground-relative radial velocity that is directly measured by the doppler radar. Microburst and downburst signatures of straightline winds are best seen using the base velocity. In GARP, base velocity for the 0.5 degree tilt is N0V.
Storm-relative velocity has the storm motion subtracted out of the base velocity, leaving the storm- relative motion:
The NWS radar displays on the Internet present both Base Velocity and Storm Relative Velocity:
The wavelength shift can be used to calculate a doppler velocity (see Doppler Radar Formulas) which is the component of movement either toward or away from the radar, also called the radial velocity.
Radial velocity is the component of wind velocity parallel to the direction of the radar beam either toward or away from the radar.
Radial velocities are defined as (+) when they are moving away from the radar (outbound).
Radial velocities are defined as (-) when they are moving toward the radar (inbound).
The figure below shows the relationship of wind and radial velocity:
The magnitude of the wind
components toward or away from the radar along the radial, i.e., the
radial velocity (Vr) are
given by
Vr = V cos (theta)
where V is the actual wind speed, and theta is the angle between the wind direction and the radial.
We can analyze this relationship by examine the two simple cases of winds exactly parallel to the radar beam and winds perpendicular to it.
Parallel (wind exactly along the beam)
where V is the actual wind speed, and theta is the angle between the wind direction and the radial.
We can analyze this relationship by examine the two simple cases of winds exactly parallel to the radar beam and winds perpendicular to it.
Parallel (wind exactly along the beam)
In this case the radar sees "all" of the wind--the radial velocity is the actual velocity.
Perpendicular (wind at right angles to the beam)
Vr = V cos (theta) = V cos (90) = V x 0 = 0
In this case the radar cannot "see" any of the wind (radial velocity is zero) because there is no component along the beam.
A typical relatively uniform wind field shows radial velocities at a maximum when the radar beam is lined up with the wind direction, and zero when it is perpendicular (as seen in the following slide from the NWS Milwaukee NEXRAD tutorial):
Note that the general wind direction can be discerned as perpendicular to the "zero isodop," and on a line between the incoming and outgoing wind maxima.
This link shows a variety of idealized wind patterns and how they would be appear in terms of radial velocity on a PPI (from the University of Illinois' Weather 2010 site). There are two main considerations in the radial velocity patterns that emerge:
(1) how the beam is oriented in relation to the wind direction at any given location
(2) vertical shear of the wind speed or direction, since the elevation of the radar beam above ground level increases with distance from the radar
The following example of radial velocity from the Portland, Oregon NEXRAD site and an accompanying model wind sounding illustrates how some of the idealized concepts apply in a real weather situation. Note the shift of the orientation of the zero isodop with range in conjunction with vertical wind shear in the sounding. Low-level winds are southerly, but shift to southwesterly aloft.
Simple Applications of Doppler Velocity:
Improved detection of severe weather was the primary budgetary justification for NEXRAD; this includes the detection of microburst divergence and tornadic rotation.
Divergence
Divergence associated with microbursts and downbursts can be detected as signatures of outbound doppler velocities in close proximity to inbound signatures along the line of the radar beam. The inbound winds are closer to the radar, with outbound winds slightly farther (the reverse, with inbound farther and outbound closer would be a convergent signature).
Rotation:
Rotational signatures are seen as side-by-side outbound and inbound doppler velocities in close proximity across the radar beam:
Example: Rotation at the bottom of the storm, divergence at the top:
Tornadic rotational velocities:
Storm-Relative vs. Base Velocity:
Base velocity is just the ground-relative radial velocity that is directly measured by the doppler radar. Microburst and downburst signatures of straightline winds are best seen using the base velocity. In GARP, base velocity for the 0.5 degree tilt is N0V.
Storm-relative velocity has the storm motion subtracted out of the base velocity, leaving the storm- relative motion:
base velocity =
storm-relative velocity + storm motion
or
storm-relative velocity = base velocity - storm motion
Rotational
signatures such as tornadoes
and supercells (if necessary hit shift-reload to animate) are
best seen using the storm-relative velocity.
In GARP, storm-relative velocity for the .5 degree tilt is N0S.or
storm-relative velocity = base velocity - storm motion
This can be visualized by
imagining you are riding along with a supercell
thunderstorm (mesocyclone). The storm-relative motion is the
circulating motion you
would see in the storm around you, i.e., the rotation.
In the following example from the Oklahoma Climatological Survey, the base velocity is the "Resultant Flow Pattern" and subtracting out the storm motion yields the storm-relative velocity which is depicted as the "Mesocyclonic Circulation." It is these kind of circulations one is looking for in trying to detect potentially tornadic thunderstorms.
In the following example from the Oklahoma Climatological Survey, the base velocity is the "Resultant Flow Pattern" and subtracting out the storm motion yields the storm-relative velocity which is depicted as the "Mesocyclonic Circulation." It is these kind of circulations one is looking for in trying to detect potentially tornadic thunderstorms.
The NWS radar displays on the Internet present both Base Velocity and Storm Relative Velocity:
The following examples show
how storm-relative velocity enhances our ability to recognize the
rotation of a supercell storm over the base velocity.
Base velocity image of a pair of supercell thunderstorms. The storms are moving rapidly from southwest to northeast toward the Nashville radar so the base velocity images indicate all inbound velocities in these supercells:
Storm-relative velocity shows rotating supercells much more clearly because the ground-motion of the storm has been subtracted out. Relative to movement with the storm, the rotation can be seen in the side-by-side doppler velocity couplets of outbound and inbound winds in close proximity
Base velocity image of a pair of supercell thunderstorms. The storms are moving rapidly from southwest to northeast toward the Nashville radar so the base velocity images indicate all inbound velocities in these supercells:
Storm-relative velocity shows rotating supercells much more clearly because the ground-motion of the storm has been subtracted out. Relative to movement with the storm, the rotation can be seen in the side-by-side doppler velocity couplets of outbound and inbound winds in close proximity
Many examples of rotational
signatures of storm-relative velocity from the 1998 Central
Florida Tornado Outbreak can be found here.
This was the deadliest tornado outbreak in Florida history,
killing 42 people.